通过Xmodem升级2610的IOS实例

rommon 8 > ?

alias set and display aliases command

boot boot up an external process

break set/show/clear the breakpoint

confreg configuration register utility

cont continue executing a downloaded image

context display the context of a loaded image

cookie display contents of cookie PROM in hex

dev list the device table

dir list files in file system

dis display instruction stream

dnld serial download a program module

frame print out a selected stack frame

help monitor builtin command help

history monitor command history

meminfo main memory information

repeat repeat a monitor command

reset system reset

set display the monitor variables

stack produce a stack trace

sync write monitor environment to NVRAM

sysret print out info from last system return

tftpdnld tftp image download

unalias unset an alias

unset unset a monitor variable

xmodem x/ymodem image download 

Erasing flash at 0x603c0000

program flash location 0x602f0000

Download Complete!

program load complete, entry point: 0x80008000, size: 0x2f0074

Self decompressing the image : ####################################

###################################################################

###################################################################

################################################################# [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Tue 06-Oct-98 18:42 by ccai

Image text-base: 0x80008084, data-base: 0x80554578

cisco 2610 (MPC860) processor (revision 0x202) with 12288K/4096K bytes

of memory

.

Processor board ID JAB0233005Z (3677578902)

M860 processor: part number 0, mask 32

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

4096K bytes of processor board System flash (Read/Write)

Press RETURN to get started!

00:00:06: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up

00:00:06: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up

00:00:06: %SYS-5-CONFIG_I: Configured from memory by console

00:00:06: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Tue 06-Oct-98 18:42 by ccai

00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on

WL_bank_2610_2>Interface Ethernet0/0, changed state to up

00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, 

changed state to up

00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, 

changed state to up

2610_2>